Gimbals are everywhere like Vincent Laforet predicted when the MōVI was announced – so why not be on a car too? It looks like there are lots of NAB releases coming out early too.
Our friends at RigWheels have just announced their new Cloud Mount Camera Vibration Isolation System that works with your handheld gimbal to make it even more seamless and simple to mount on a vehicle.
Watching the video i'm damned impressed. Not something we do much around the planet5D HQ, but if I were going to put a $10k camera on my car, I'd want 2 things… simple to mount and secure!
Of course, every car mount needs a backup – so you'll use a safety strap system of course, but what could be easier than a magnetic system?
And I know you're asking the same question I did… what about scratching the car?
“The magnets are cased in rubber so they won’t damage the surface you are mounting to.”
Overall, it looks pretty impressive – make sure to watch the second video with more demo footage.
I'm looking forward to seeing this at NAB! Hmmm… I wonder if they'll have a Jeep there to mount it?
Cloud Mount Camera Vibration Isolation System
Cloud Mount – Camera Vibration Isolator System
The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.
Building on our RigMount XL mounting platform, the Cloud Mount adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.
This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system (more than $500.00 for typical four point rigging). The Cloud Mount (when purchased complete with case) can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position.
Our RigMount magnets are the key to the fast and easy setup of the Cloud Mount. 8 Magnets in the DSLR package provide up to 400lb of pulling force. That is a really large number but in real world conditions it is appropriate measure. magnetic mounting Our mid-size package includes 12 magnets (600b) and our pro package 16 magnets (800b). The magnets are cased in rubber so they won’t damage the surface you are mounting to. For some some surfaces suction is necessary and each option includes 8 of our standard suction cups and vacuum suction cups are available for the most demanding applications.
As with all RigWheels products, there are many different ways you can configure components depending on the shot you’re trying to achieve. What makes the Cloud Mount markedly unique is the versatility of the parts and the degree of fine-tuning and customization possible. With our patent pending design you can build up the system to accommodate ANY gimbal/camera combination using standard cable “wire rope”.
Standard cable requirement for a Ronin-M with DSLR is 4, 1/4″ sections of cable. 8, 1/4″ sections will support a standard Ronin with a mid to full-size camera. 16, 1/4″ sections will support approximately 125 pounds. The vibration isolator of this system can use up to 24 sections of cable of up to 7/16″ diameter. (we would love to see a photo of a setup that actually requires that capacity) Because you are able to “let in” or “let out” the cable, you can fine-tune the resistance necessary for your setup. You want vibration isolation loose enough to absorb all of the bumps and vibration but strong enough not to fail under the weight of the camera and gimbal. The Clould Mount gives you the ability to find that perfect balance of resistance, not only for the camera and gimbal but also for the terrain on which you will be operating.
Learn more about Rigwheels Cloud Mount Camera Vibration Isolation System
(cover photo credit: snap from source in post)
Latest posts by planetMitch (see all)
- My RØDE Reel: Watch Films and Vote! - August 21, 2018
- Sigma 14mm F1.8 Art, 135mm F1.8 Art and 70mm F2.8 MACRO Art Lenses for Sony E-Mount Now Shipping - August 17, 2018
- Create Powerful Films with Hurlbut Visuals Course on Cinematography - August 16, 2018